Tenant electricity billing and smart metering for Zimbabwean property owners
When one ZETDC meter feeds a whole building, someone has to share out the bill. If it is done badly, it leads to arguments, losses and legal risk.
In this article
- Three ways to bill tenants
- The numbers that cause trouble
- Setting up a sub-metering system
- Beyond billing: finding savings
- Meter accuracy and what to specify
- Prepaid systems: what to check before you buy
- Allocating the maximum demand charge
- The regulatory question, handled carefully
- Disputes and how to settle them
- What a good tenant statement shows
- How AVEX GRID helps
Key points
- A landlord who buys power on one meter and passes it on to tenants needs accurate sub-meters and a clear billing method.
- ZERA licenses electricity businesses, and a retail licence covers buying power to resell. Ask ZERA and a lawyer how this affects your recharges.
- Split prepaid meters are promoted as a way to end disputes between landlords and tenants over shared meters.
- The usual problems are unmetered common areas, estimated readings and losses nobody can explain.
- Smart sub-metering also shows where the building wastes power, which helps the landlord cut the common-area bill.
津巴布韦物业业主的租户电费计量与智能电表
- 业主若用一块总表购电再转供租户,需要准确的分表和清晰的计费方法。
- ZERA对电力经营者发放许可,零售供电许可涵盖购电转售。业主的转供安排是否受影响,应向ZERA和律师确认。
- 据报道,分体式预付费电表被推广为解决业主与租户共用电表纠纷的办法。
- 最常见的问题是公共区域未计量、估算读数和不明损耗。
- 智能分项计量还能显示建筑的能耗浪费所在,帮助业主降低公共区域电费。
- AVEX GRID 提供计量方案设计与账单核对服务(英文沟通)。
联系方式:WhatsApp +7 900 131 7406,邮箱 inquiries@avexgrid.com。
Many Zimbabwean shopping centres, office parks and apartment blocks get power through a single utility connection. The owner then recovers the cost from the tenants. When tenants dispute their charges, the landlord loses time and goodwill. This guide explains how to set up fair billing that you can defend. It also covers what to check on the rules side. It is written for property owners, managers and the investors who value property income.
Three ways to bill tenants
| Method | How it works | Strengths | Weaknesses |
|---|---|---|---|
| Fixed share (by floor area) | Landlord divides the bill by area | Simple | Unfair to low users; invites disputes |
| Sub-metering with monthly bills | Each tenant has a meter; landlord reads and invoices | Fair, auditable | Reading errors; billing effort; arrears risk |
| Prepaid or smart sub-metering | Tenants buy credit or are billed from remote reads | Cash flow; no manual reading; usage visible | Meter cost; needs approved, accurate meters and secure software |
The numbers that cause trouble
- Common-area load. Lifts, lighting, pumps and security are real costs. Decide at the start how you share them, and write it in the lease.
- Maximum demand. The main meter carries a demand charge. This is the part of the bill based on your highest power in the month, not on how much energy you used. Tenants do not see it. So landlords either spread it by area or by each tenant's share of the peak. Be clear about which one you use.
- Losses. The sum of the sub-meters is never exactly the main meter. A gap of a few percent is normal. A large gap points to faults, theft or a wrong meter multiplier.
- Tariff changes. The tariff is the price list for electricity: the rates per unit, per kVA and the fixed charges. If the utility changes it in the middle of a month, the invoices should show how you applied the new rate.
Illustration of the arithmetic. Common-area use, meter error and unmetered supplies all contribute. Source: AVEX GRID calculation.
Setting up a sub-metering system
- Survey the building. Trace the supply to each tenant and note shared circuits. Many buildings have cross-wired circuits that you must separate first.
- Choose meters. Use accurate meters that resist tampering. They should have a recognised accuracy class. Size them to each tenant's load. For three-phase tenants, use three-phase meters.
- Install and commission. Fit current transformers where needed. Check the phase sequence. Calibrate or test against a reference.
- Set the billing rules. Define the rate, the share of common-area cost and how disputes are handled. Put them in the lease or an addendum.
- Reconcile monthly. Add up the sub-meters and the common-area load. Compare the total with the main meter, and investigate any gap.
Beyond billing: finding savings
Smart sub-meters record use at short intervals. This data shows when tenants and common areas peak, which loads run overnight and where a power-factor or demand problem lies. Landlords often find savings in common-area lighting, pumps and air-conditioning schedules. Where the roof is suitable, solar can serve the common load and, with the right approvals, the tenants. See our guide to solar and net metering.
Meter accuracy and what to specify
A billing dispute is usually a dispute about whether the meter can be trusted. So the specification matters more than the price. Ask for static meters built to the accuracy classes of the IEC 62053 series. IEC is the International Electrotechnical Commission, which writes international standards for electrical equipment. Class 1 is a sensible minimum for tenant billing. Ask for tamper detection that records cover removal and reverse flow.
Larger tenants are fed through current transformers. The ratio of the transformer and the multiplier programmed into the meter must agree. If they do not, the error shows up as a clean multiple on the bill. Ask for a test certificate or a bench test at delivery. Keep the serial numbers, ratios and installation date on a register that the tenant can see on request. A meter that is tested on installation and tested again on complaint is the cheapest protection a landlord can buy.
Prepaid systems: what to check before you buy
Prepaid sub-metering moves the cash risk from the landlord to the tenant. It also removes the monthly reading. Most prepaid meters in southern Africa use the Standard Transfer Specification. This is an international standard for how a credit token is made and accepted. Tokens are therefore secure, and you can change the meter without changing the vending system.
Before you commit, check three things. First, who holds the vending software and the tenant data, and what happens if the supplier closes? Second, how are the fixed charges collected? These include a service fee or a share of the maximum demand charge. Maximum demand is the highest average power you draw over a short interval in the month, and one short peak can set this charge for the whole month. A meter that deducts a fixed fee from each purchase can surprise a tenant who buys small amounts. Third, how does a tenant get a statement of purchases and use? Press reports on shared meters describe the arguments that start when tokens are bought but nobody can see where the credit went. A clear statement removes most of them.
Allocating the maximum demand charge
The demand charge is where fairness is hardest. Suppose a building's monthly utility bill is US$10,000. Of this, US$2,000 is a demand charge set by the highest half-hour of the month, and the other US$8,000 is for energy. Dividing the energy cost by each tenant's kilowatt-hours is straightforward. You can divide the demand charge in two ways.
The first way is to divide it by energy share. This is simple. It is reasonably fair if every tenant uses power at similar times. The second way is to divide it by each tenant's share of the load at the moment of the building's peak. This is fairer to a tenant who works days and switches off in the evening. But it needs interval data and a method that you can explain. Whichever you choose, write it in the lease and apply it the same way every month. The common mistake is to change the method after a tenant complains. That turns a technical question into a dispute about trust.
The regulatory question, handled carefully
Electricity supply in Zimbabwe is a licensed activity under the Electricity Act. ZERA's 2024 licensing guidelines describe a retail supply licence as allowing its holder to buy power for resale to its customers. We did not find a published rule on two questions. Does a landlord who recovers the actual cost through sub-meters need such a licence? And does a margin change the answer? Press reports in 2025 described a plan by ZERA and the Zimbabwe Electricity Transmission and Distribution Company (ZETDC) to open retail supply to licensed private firms in set zones. This suggests the rules are still changing.
The safe course is to recover cost only. Show the utility bill and the calculation on every tenant statement. Put the question to ZERA in writing before you set a rate above your own cost, and keep the reply on file.
Disputes and how to settle them
Most disputes fall into a few types. A tenant says the meter reads too high: test it against a reference meter and give them the result. A tenant says they are paying for the common area: show them the common-area meter and the rule for sharing it. A tenant says the total is more than the utility charged: add up the sub-meters and the common load, compare with the main meter, and explain the gap.
Agree a procedure in the lease before the first complaint. Name a contact, set a time limit to respond, and make an independent test the final step. A simple, written procedure costs little. It tends to be used rarely, because tenants who know it exists are less likely to need it.
What a good tenant statement shows
The statement is the product the tenant sees, so it is worth designing well. It should show the billing period, the opening and closing readings and the energy used. It should show the rate and how it was set. It should show the tenant's share of common-area energy and of the demand charge, any fixed fee, and the total. It should also show the building's total from the utility bill and the sum of the shares. Then anyone can check that the landlord is not recovering more than the cost. Add the meter serial number, the previous month's use for comparison and a contact for questions. Statements with these items are rarely queried. When they are, the answer is already on the page.
How AVEX GRID helps
- Metering audit: checks your sub-meters against the main meter and finds the losses.
- Sub-metering design with meter specification and a billing method that holds up in a dispute.
- Common-area savings plan with measured load data.
- Solar for common areas, with the connection and registration handled.
What AVEX GRID can take off your hands
AVEX GRID is an engineer-led energy consultancy in Zimbabwe. We do the technical work that turns an energy investment into a plant that is licensed, connected, financed and performing, whether you are a local operator or an investor overseas.
We quote fixed prices after a free scoping call and reply the same working day.
Frequently asked questions
What accuracy should tenant sub-meters have?
Static meters to the IEC 62053 series, with accuracy class 1 as a sensible minimum for billing, plus tamper detection. Larger tenants fed through current transformers need the transformer ratio and the programmed multiplier to agree.
Can a landlord charge tenants for electricity in Zimbabwe?
Recovering actual cost through sub-metering is common practice. Reselling at a margin may raise a licensing question under the Electricity Act, which we help you check with ZERA.
Are prepaid sub-meters a good idea?
They improve cash flow and avoid arrears, but the meters must be accurate and the vending system secure. Choose products that can be tested and audited.
Why does the sum of my sub-meters not match the main meter?
A small gap is normal. A large gap suggests faulty meters, unmetered loads, theft or a wrong multiplier. A metering audit finds it.
Can sub-metering reduce my bill?
It does not cut the utility bill directly, but tenants who pay for what they use tend to use less, and the data shows where to save in common areas.
Sources and notes
General information to help you plan. The rules that apply to your site are confirmed by AVEX GRID against the current gazetted text, ZERA and ZETDC as part of the work. The sources used are listed below.
- IEC 62053-21: static meters for active energy, classes 1 and 2
- ZERA: Retail supply licence application form
- ZERA: Electricity licensing guidelines
- Pindula: Split electricity meters help landlords and tenants end ZESA squabbles
- Zimpricecheck: Tenants and landlords feel the wrath of the new stepped tariff system