Electrician servicing an industrial control cabinet
Carbon9 November 2026·6 min read

EU CBAM for Zimbabwean exporters: what changed in 2026 and what to prepare

Since 1 January 2026 the EU carbon border levy has been a real cost. EU buyers now ask their suppliers for emissions data.

In this article
  1. What CBAM is, in one paragraph
  2. Key dates
  3. Which Zimbabwean exports are covered?
  4. The 50-tonne question
  5. What the buyer will ask you for
  6. Where electricity matters, and where it does not
  7. A 90-day preparation plan
  8. How AVEX GRID helps

Key points

  • The EU carbon border levy (CBAM) started charging on 1 January 2026. The first yearly declaration, for 2026 imports, is due by 30 September 2027.
  • It covers cement, iron and steel (including ferrochrome), aluminium, fertiliser, hydrogen and electricity. Lithium, nickel, gold, platinum and tobacco are not on the list.
  • The EU importer carries the legal duty, but the data comes from you. Without measured emissions, buyers use default values that are set high on purpose.
  • The share to be paid starts small in 2026 and rises to 100% by 2034, so poor data costs more every year.
  • Preparation is mostly metering and records: fuels and inputs per tonne of product, process emissions and a written calculation method.
中文摘要 · CHINESE SUMMARY

欧盟碳边境调节机制(CBAM)与津巴布韦出口商:2026年的变化与准备工作

  • 欧盟CBAM的正式实施期自2026年1月1日起生效。据报道,涵盖2026年进口的首次年度申报截止日期为2027年9月30日。
  • 涵盖产品包括水泥、钢铁(据报道含铬铁等铁合金)、铝、化肥、氢和电力。锂、镍、黄金、铂金和烟草不在清单内。
  • 法律责任在欧盟进口商,但排放数据需要由出口商提供。若无法提供实测数据,进口商只能采用据报道被刻意设定得较高的默认值。
  • 据报道,需缴纳的比例在2026年较低,并将随欧盟免费配额退出而逐年上升,到2034年接近100%,因此数据不准的代价逐年增加。
  • 准备工作主要是计量与记录:单位产品的燃料、还原剂和投入、工艺排放,以及有文件记载的计算方法。对钢铁类产品,仅计入直接排放,电力不进入CBAM公式。
  • AVEX GRID 可协助建立能耗与排放数据体系(英文沟通,可远程)。请以欧盟官方文件为准核实最新规则。

联系方式:WhatsApp +7 900 131 7406,邮箱 inquiries@avexgrid.com。

For years the European Union's Carbon Border Adjustment Mechanism, known as CBAM, was something exporters could watch from a distance. It is a levy on the carbon inside certain goods that are imported into the EU. In 2026 it became a real cost. This guide explains what it covers, who is affected in Zimbabwe, and what an exporter should have ready when a European buyer asks for emissions data. It is written for exporters of metals and fertilisers, and for the managers and lenders who depend on them.

How we use thisEvery figure here is checked against your own bills, the current gazetted text and the regulator before it goes into a scope, a model or a lender file. Send us your documents and we do that for you.

What CBAM is, in one paragraph

The EU already puts a price on carbon for its own factories. CBAM adds a matching charge on selected imports. This stops foreign producers from gaining an advantage by making goods more cheaply and with more pollution. The importer in the EU must declare the emissions inside the goods and buy certificates to cover them. The price follows the EU carbon market. The importer pays, but it will pass the cost and the paperwork back to you, the supplier.

Key dates

WhenWhat happens
2023 to 2025Transitional period: importers reported emissions; no payment.
1 January 2026Definitive period starts. Imports of covered goods begin to carry a liability.
From 1 February 2027Certificate sales open on the common platform.
By 30 September 2027First annual declaration, covering 2026 imports, due.
Through 2034The payable share rises each year as free allowances are phased out.

Which Zimbabwean exports are covered?

The list is by product group, not by country. These are the Zimbabwean exports most likely to be caught:

  • Ferro-alloys, especially ferrochrome. They fall under the iron and steel group. Where you have no measured data, the EU uses default emissions values that are set high.
  • Iron and steel products and some steel articles made from them.
  • Fertilisers and certain chemicals, where they are exported to the EU.
  • Cement and aluminium, in the unlikely case of shipments to the EU.

Lithium concentrate, nickel, gold, platinum-group metals and tobacco are not covered at present. That can change, because the EU has said it will review the list. So we re-check it for each job.

Share of the CBAM obligation payable, by yearPercent of the obligation, as free allowances are phased out
0%25%50%75%100%100%20262028203020322034

Source: European Commission, CBAM

The 50-tonne question

The EU has a simplification for small importers. If an importer brings in less than about 50 tonnes of covered goods a year in total, it is exempt. If your EU customers take large volumes, this will not help you. If you sell small lots, ask your buyer whether it applies. We check the exact limit for your products.

What the buyer will ask you for

  1. Production data for each product: tonnes produced and tonnes shipped to the EU.
  2. Energy use per tonne: electricity, coal, coke, diesel and any other fuels, with meter readings or invoices as proof.
  3. Fuels and reductants: diesel, coal, coke, char and other inputs burned or used up on site, with purchase records and carbon content. A reductant is a material such as coke or charcoal that strips oxygen from ore when making metal, and it releases carbon dioxide. Electricity is not counted for iron and steel goods, but buyers may still ask for it.
  4. Process emissions: for example from reducing agents and carbonates, worked out with the calculation method the EU sets.
  5. The method itself: a written procedure that anyone can repeat, ideally checked by an independent verifier.

Suppliers who can show measured, verified data protect their margin. Those who cannot are priced on the default values.

Where electricity matters, and where it does not

For iron and steel goods, which include ferro-chromium, the rules count only direct emissions. Direct emissions are those of the production process. They come from fuels burned on site and from the carbon released when a reductant strips oxygen from the ore. Electricity you buy from the grid is an indirect emission, so it is not counted. This means a solar plant or a better grid connection does not change the CBAM charge on these goods. (For cement and fertilisers, indirect emissions do count.)

Electricity still matters for your cost, for security of supply, and for the captive-power requirement that applies to smelters. A buyer with its own Scope 3 targets may also ask for it. Scope 3 means all the other emissions in the buyer's value chain, such as those of its suppliers. Read our tariff guide and the audit guide for those points. We corrected this section in November 2026. An earlier version said that cleaner electricity was the main CBAM lever for metals. That is wrong for these goods.

A 90-day preparation plan

  1. Weeks 1 to 2. Confirm with your buyer which of your products are covered and what data format they need.
  2. Weeks 2 to 6. Install or check meters on the main furnaces, kilns and incoming supplies. Collect 12 months of fuel and electricity records.
  3. Weeks 6 to 10. Build the emissions calculation, write down the method and test it against your invoices.
  4. Weeks 10 to 13. Look for the cheapest cuts in direct emissions, such as reductant and fuel use, furnace yield and use of off-gas. If the buyer requires it, arrange verification. That means an independent person checks that your figures are true and that you followed the method.

How AVEX GRID helps

  • Metering and data design so your energy and emissions numbers stand up to a verifier.
  • Energy-use analysis that finds the savings which lower both the bill and the carbon figure.
  • Direct-emission studies of reductant, fuel and furnace options, showing the effect on your emissions per tonne. Solar and storage studies remain useful for cost and for reliable supply.

We are an engineering practice, not an accredited verifier. Accredited means officially approved to do the job after being checked against a standard. We prepare the data and the method. An accredited body signs it off where the buyer requires that.

What AVEX GRID can take off your hands

AVEX GRID is an engineer-led energy consultancy in Zimbabwe. We do the technical work that turns an energy investment into a plant that is licensed, connected, financed and performing, whether you are a local operator or an investor overseas.

Feasibility and bankable studiesYield, load and hybrid models, and the technical file lenders and ZERA read.
Power-system engineering (ETAP)Load flow, short circuit, arc flash and protection studies for approvals and safe design.
Licence and PPA technical supportZERA licence documents, ZETDC connection studies, PPA technical schedules.
Owner's engineerDesign review, testing and commissioning on your side of the EPC table.
Tariff, audit and compliance workMaximum-demand and power-factor savings, readiness for energy-management rules.
Remote plus on the groundModelling for overseas teams, with an engineer in Zimbabwe for site, utility and regulator work.

We quote fixed prices after a free scoping call and reply the same working day.

Frequently asked questions

Does CBAM apply to Zimbabwean exporters directly?

The legal obligation rests on the EU importer. In practice the importer will ask you for emissions data and may reduce its price if you cannot supply it.

Is ferrochrome covered by CBAM?

Ferro-alloys, including ferrochrome, fall within the iron and steel scope. We check the product code for you.

What if I cannot provide measured emissions data?

The importer must then use default values. These are set high, to encourage exporters to report real figures.

Are lithium, nickel, gold or platinum affected?

Not on the current list of covered goods. The EU can widen the scope, so watch for updates.

Can AVEX GRID verify our CBAM report?

No. We prepare the energy data and calculation method. Verification, where required, is done by an accredited body.

Topics: CBAM ZimbabweEU carbon border adjustment mechanismferrochrome CBAMCBAM emissions data exporterscarbon footprint of exports ZimbabweCBAM readinessenergy consultant Zimbabwe

Sources and notes

General information to help you plan. The rules that apply to your site are confirmed by AVEX GRID against the current gazetted text, ZERA and ZETDC as part of the work. The sources used are listed below.

DJ

Devine Tafara Javangwe is the founder and lead consulting engineer at AVEX GRID. He holds an MSc in Electrical Power Engineering (Southern Federal University, 2025), is a Professional Member of the Zimbabwe Institution of Engineers and an IEEE member.

About the practice · Contact

Is your export data CBAM-ready?

Tell us what you export and send a few months of energy records. We say what the EU buyer will ask for, where your data is weak and what the cheapest fixes are.

+263 78 488 9775 · Autherstone Street 21, Marondera, Zimbabwe · Remote across Southern Africa